Although steel structure construction is convenient and fast, every process from design to installation construction requires strict technical review. Below, the editor will talk about the construction process and precautions of steel structure engineering!

1、 Before the construction of steel structures, supervision personnel and technical personnel from the construction unit should be organized to review the design drawings and relevant technical standards, and technical disclosure should be done well.

2、 The acceptance of steel structure components upon entry ensures that the quality meets the design requirements, including steel structure specifications, rust removal, welding quality, etc.

3、 According to the design requirements, pre embed foundation anchor bolts and pour concrete.

4、 On site hoisting follows the principle of first column and then beam, first bottom and then top, from the middle to both sides. The steel column is lifted first, and the distance between the lifting column base and the foundation bolt is about 30cm. The bolts are tightened to complete the installation of the steel column; Lift the steel beam and then lift the rafters.

5、 Correct the lifting structure, use a lifting hammer to check the steel column correction, and use a pad to correct the inclined steel column; After correcting the steel beam with a spirit level, use a jack and a chain block for correction.

6、 Construction safety, as the lifting of steel structures involves high-altitude operations and human-machine cooperation, operators must wear safety helmets, fasten safety ropes, and safety commanders need to command the lifting.

After reading the previous text, I believe you have gained some understanding of the process and precautions during steel structure construction, and I hope it can be helpful to you. If there are any other cooperation matters related to steel structure engineering, please feel free to call for consultation.